PL-1000-T2 贴胶机

■适用范围
▪PCBA板、FPC模组、⼿机摄像模组、LED照明⾏业、 太阳能光伏、汽车电子等等。
■特点 Characteristic
▪点胶品质稳定:使用气动阀点胶;
▪点胶速度快:约6万-8万个点每小时;
▪点胶良率高:印刷机开的铜网比较容易堵孔,还有表面会粘有剪掉的插件引脚,或者元件
▪点胶方便:对于红胶工艺,有元件库功能,方便新产品导入、换线的程式制作。
  • img1

    适用范围

    PCBA板、FPC模组、⼿机摄像模组、LED照明⾏业、 太阳能光伏、汽车电子等等。

    English

    PCBA board, FPC module, mobile phone camera module, LED lighting industry, solar photovoltaic, automotive electronics, etc.

    ■特点 Characteristic

    点胶品质稳定使气动阀点胶;

    点胶速度6-8万个点每小时;

    点胶良率高印刷机开的铜网比较容易堵孔,还有表面会粘有剪掉的插件引脚,或者元件

    点胶方便对于红胶工艺,有元件库功能,方便新产品导入、换线的程式制作。

    English

    Point glue quality is stable, use pneumatic valve point glue.

    Point glue is fast, about 60,000 to 80,000 points per hour.

    The high adhesive rate, the copper network opened by the printing press is easier to plug, and the surface will be stuck with a cut plug-in pin, or components, which can easily lead to poor batch.

    The point glue is convenient, for the red glue process, there is a component library function, facilitate the introduction of new products,

    wire transfer program production.

    机器参数 Parameters

    (model)

    PL-1000-T2

    整体式机架 (Machine Footprint)

    920 mm(W)×1250  mm(D)×1500  mm(H)

    电脑控制 (Computer)

    ⽤⼯业电脑 (Industrial PC)

    CCD视觉定位 (CCD Location)

    校准运⾏精度 (Auto Calibrate The Accuracy During Moving)

    (Conveyor)

    配高温⽪带输 1段停板模式(3段停板模式)

    ⻢达 (Step Motor transport)

    20m/min

    动调宽Auto Width)

    单轨道:80〜450mm(Single   Lane:  80〜450mm)

    X、Y驱动方式   (X、Y  Drive  Model )

    线电机与编码驱动Linear  Motor With Linear  Encoders

    Z驱动方式(Z  Axis Drive Mode

    伺服⻢达(Servo  Motor

    最高速度(Speed

    2000mm/S

    运⾏精度(Accuracy

    0.01mm

    点胶⾏程(Dispense  Area

    X=340mm Y=450mm  Z=80mm

    可搭数量(Dispense   Head

    1(2) Single Head(Dual Head For Option)

    体加Valve  Heat

    室温〜80℃±3℃(Room  Temperature〜80℃±3℃ )

    涂料容量 (Material Volume)

    30CC或者50CC (30CC Or 50CC)

    涂料检测 (Material Detection)

    动检测  (Automatic Inspection)

    嘴清洗装置(Needle Cleaner Assembly )

    真空清理 (Vacuum Cleaning System)

    压报(Input Air Pressure  Alarm)

    +声光 (Menu & Buzzer &Red Light Alarm)

    (Scanner Connector)

    232插⼝ (RN232 Port

    ⼝(Communication   Connector

    SMEMA

    程模式(Program  Method

    入任何机文件或在线视觉编程(Offline  Programming,  Manual  Teach Mode)

    电压Input  Volt

    220V   50〜60HZ

    Air Pressure

    2

     

    6kg/cm

    功率(Power

    2.5KW-3.5KW

    重量(Weight

    1200 kg

    安全准(Safety Standard

    CE